Kayayyaki
Acrylonitrile Butadiene Styrene Carrier Tef
Sinho's ABS (Acrylonitrile Butadiene Styrene) tef mai ɗaukar nauyi yana ba da ƙarfi da kwanciyar hankali akan lokaci da bambance-bambancen zafin jiki daidai da ƙa'idodin EIA-481-D. Ƙarfin wannan abu ya fi polystyrene (ps), don haka yana ba da madadin tattalin arziki ga kayan polycarbonate (PC).
Wannan kayan yana da haɓaka sosai don ƙananan aljihu don nisa na 8mm da 12mm, ya dace da babban tef ɗin ɗaukar hoto a madaidaiciya madaidaiciya madaidaiciya madaidaiciya. Abubuwan gudanarwa na ABS suna amfani da sarrafa tsarin jujjuya don gamsar da aikace-aikace daban-daban daga buƙatun abokin ciniki, musamman ƙirƙira don ƙananan ƙirar aljihu. Idan kuna tunanin farashin kayan PC ya yi yawa, wannan kayan zai zama madadin tattalin arziki don adana kuɗin ku. Dukansu iska guda ɗaya da matakin-iska sun dace da wannan kayan a cikin takarda da aka lalata da filasta.
Cikakkun bayanai
| Ya dace da ƙananan aljihu | Kyakkyawan ƙarfi da kwanciyar hankali sun sa ya zama madadin tattalin arziƙi zuwa kayan polycarbonate (PC). | An inganta don nisa a cikin 8mm da 12mm tef | ||
| Mai jituwa daSinho Antistatic Matsi Matsi Mai Mahimmanci Murfin KasetkumaSinho Heat An Kunna Kaset ɗin Murfin Manne | Iska ɗaya ko matakin-iska don zaɓinku. | 100% a cikin aikin duba aljihu |
Abubuwan Al'ada
| Alamomi | SINHO | ||
|
| Launi | Baki | |
|
| Kayan abu | Acrylonitrile Butadiene Styrene (ABS) | |
|
| Gabaɗaya Nisa | 8 mm, 12 mm | |
|
| Kunshin | Iska ɗaya ko Tsarin iska ɗaya akan 22" reel na kwali |
Abubuwan Jiki
| Abubuwan Jiki | Hanyar gwaji | Naúrar | Daraja |
| Takamaiman Nauyi | Saukewa: ASTM D-792 | g/cm3 | 1.06 |
| Kayayyakin Injini | Hanyar gwaji | Naúrar | Daraja |
| Ƙarfin Ƙarfin Ƙarfi @Yield | ISO527 | Mpa | 45.3 |
| Ƙarfin Ƙarfi @Break | ISO527 | Mpa | 42 |
| Tsawaita Tsayawa @Break | ISO527 | % | 24 |
| Abubuwan Lantarki | Hanyar gwaji | Naúrar | Daraja |
| Juriya na Surface | ASTM D-257 | Ohm/sq | 104 ~ 6 |
| Thermal Properties | Hanyar gwaji | Naúrar | Daraja |
| Zafin murdiya | Saukewa: ASTM D-648 | ℃ | 80 |
| Ƙunƙarar ƙira | Saukewa: ASTM D-955 | % | 0.00616 |
Rayuwar Shelf da Ajiya
Ya kamata a yi amfani da samfurin a cikin shekara 1 daga ranar da aka yi. Ajiye a cikin marufi na asali a cikin yanayin da ake sarrafa yanayi inda zafin jiki ya bambanta daga 0 ~ 40 ℃, dangi zafi <65% RHF. Ana kiyaye wannan samfurin daga hasken rana kai tsaye da danshi.
Kambar
Haɗu da ma'aunin EIA-481 na yanzu don camber wanda bai fi 1mm ba cikin tsayin millimeter 250.
Dacewar Tafi
| Nau'in | Matsanancin Matsi | An kunna zafi | |||
| Kayan abu | SHPT27 | Saukewa: SHPT27D | Saukewa: SHPTPSA329 | SHHT32 | SHHT32D |
| Polycarbonate (PC) | √ | √ | x | √ | √ |
Albarkatu
| Abubuwan Jiki don Kayayyaki | Takardar bayanan Tsaron Abu |
| Tsarin samarwa | Rahotannin da aka gwada Tsaro |