Kayayyaki
CTFM-SH-18 Mai ɗaukar Tef Kafa Na'ura
Sinho's CTFM-SH-18 Carrier Tepe Forming Machine an ƙirƙira don amfani da hanyar samar da linzamin kwamfuta, ana samun wannan injin don duk tef ɗin ɗaukar hoto wanda aka kera a cikin wannan aiki.Da farko kafin dumama, sannan samar da kayan aiki.Matsakaicin duk cikin wannan tsarin ƙirƙira shine mita 360 a kowace awa, mafi ƙarancin gudu shine mita 260 / awa, daidaitawa mai sauƙi akan buƙata.Nisa da aka kafa shine daga 12mm zuwa 88mm tare da zurfin rami mafi zurfin 22mm, ƙarin zurfin buƙatar al'ada.
M, mai sauƙin amfani, halayen lantarki na ci gaba suna sa CTFM-SH-18 ya zama cikakkiyar zaɓi don buƙatun ku
Siffofin
● Girman L x W x H (cm): 300 × 60 × 166
● Nauyi (kg): 280kg
● Gudun Mitar / Sa'a: 260-360 mita / awa (ya dogara da abubuwa)
● Nisa Tsara (mm): 12-88mm
● Abubuwan da ake samuwa: PS, PC, PET da dai sauransu.
● Kauri mai ɗaukar hoto: 0.5mm
● Max Ko (mm) ≤22mm (Bukatar al'ada don ƙarin zurfin KO)
● Diamita na reel na fitarwa: ≤600mm (launi ɗaya), don ƙarin yadudduka yana buƙatar ƙara ƙarin Injin Winding Cross
● Zazzabi mai zafi: 0-300 ℃ ci gaba da daidaitawa
● Tsawon Sufuri (mm): 40-112
● Ƙarfin da ake buƙata: AC110/220V, 50-60HZ
● Samar da iska: 8.0kg/cm² 0.7±0.1kg/cm²
● Amfanin Wuta: Max 2500W
● Yanayin yanayi: -5℃ ~ 40℃
Babban Ma'aunin Na'ura
| A'A. | Abubuwa | Alamar | Jerin |
| 1 | PLC | Japan Mitsubishi | Farashin FX3GA |
| 2 | Kariyar tabawa | Taiwan Weinview | TK |
| 3 | Motar ciyarwa | Alamar Sinanci | 4GN |
| 4 | Motar mirgina | Alamar Sinanci | 4GN |
| 5 | Dumama, Samar da Silinda | Taiwai CHELIC | Madogaran sandar sanda biyu |
| 6 | Sauran silinda | Taiwai SHAKO | |
| 7 | Ƙarfi | Taiwan Mingwei | 350W |
| 8 | Solenoid bawul | Janpan SMC | Minti 2 |
| 9 | Ja da bel ɗin tuƙi | Japan panasonic servo | Match Silver KK module |
Albarkatu
| Takardar Kwanan Wata |