Kayayyaki
Polycarbonate Flat Punched Carrier Tef
Sinho's Flat Punched Carrier Tape an ƙera shi don shugabannin Tef da Reel da tireloli don reels na ɓangaren ɓangaren, kuma ya dace a yi amfani da shi tare da mafi yawan masu ba da abinci na SMT. Sinho's Flat Punched Carrier Tef yana samuwa don ƙera shi tare da kewayon allo na kauri da girman tef a sarari & baƙar fata polystyrene, kayan polycarbonate baƙar fata, bayyanannen polyethylene terephthalate, da kayan farar takarda. Ana iya raba wannan tef ɗin da aka buga zuwa reels na SMD na yanzu don tsawaita tsayi da kuma guje wa sharar gida.
Polycarbonate (PC) Flat Punched Carrier Tef ɗin kayan baƙar fata ne masu sarrafa kayan da ke ba da kariya daga fitarwar lantarki (ESD). Ana samun wannan kayan a cikin kewayon allo na kauri daga 0.30mm zuwa 0.60mm don nau'ikan nisa tef daga 4mm har zuwa 88mm.
Cikakkun bayanai
| An yi shi da polycarbonate baƙar fata abu mai karewa daga ESD | Akwai shi a cikin kewayon allo na kauri daga 0.30 zuwa 0.60mm | Akwai masu girma dabam daga 4mm zuwa 88mm | ||
| Ya dace akan duk manyan masu ba da abinci na SMT | Akwai a tsawon 400m, 500m, 600m | Tsawon al'ada yana samuwa |
Akwai Nisa
Fadi8-24mm kawai tare da ramukan sprocket
| SO | E | PO | DO | T | |
| / | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±0.05 | |
| 12.00 ±0.30 | / | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±0.05 |
| 16.00 ±0.30 | / | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±0.05 |
| 24.00 ±0.30 | / | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±0.05 |
Abubuwan Al'ada
| Alamomi | SINHO | |
| Launi | Baki | |
| Kayan abu | Polycarbonate (PC) Gudanarwa | |
| Gabaɗaya Nisa | 8mm, 12mm, 16mm, 24mm, 32mm, 44mm, 56mm, 72mm, 88mm; | |
| Kauri | 0.3mm, 0.4mm, 0.5mm, 0.6mm ko wasu kauri da ake bukata | |
| Tsawon | 400M, 500M, 600M ko wasu tsayin al'ada |
Kayayyakin Kayayyaki
| Abubuwan Jiki | Hanyar gwaji | Naúrar | Daraja |
| Takamaiman Nauyi | Saukewa: ASTM D-792 | g/cm3 | 1.25 |
| Ƙunƙarar Mold | Saukewa: ASTM D955 | % | 0.4-0.7 |
| Kayayyakin Injini | Hanyar gwaji | Naúrar | Daraja |
| Ƙarfin Ƙarfi | Saukewa: ASTM D638 | Mpa | 65 |
| Ƙarfin Flexural | Saukewa: ASTM D790 | Mpa | 105 |
| Modulus Flexural | Saukewa: ASTM D790 | Mpa | 3000 |
| Ƙarfin Tasirin Izod (3.2mm) | Saukewa: ASTM D256 | J/m | 300 |
| Thermal Properties | Hanyar gwaji | Naúrar | Daraja |
| Fihirisar Ruwan Narke | Saukewa: ASTM D1238 | g/10 min | 4-7 |
| Abubuwan Lantarki | Hanyar gwaji | Naúrar | Daraja |
| Juriya na Surface | ASTM D-257 | Ohm/sq | 104~5 |
| Flammability Properties | Hanyar gwaji | Naúrar | Daraja |
| Ƙimar harshen wuta @ 3.2mm | Na ciki | NA | NA |
| Yanayin sarrafawa | Hanyar gwaji | Naúrar | Daraja |
| Yanayin Ganga | | °C | 280-300 |
| Mold Zazzabi | | °C | 90-110 |
| Yanayin bushewa | | °C | 120-130 |
| Lokacin bushewa | | Sa'a | 3-4 |
| Matsin allura | MED-HIGH | ||
| Rike Matsi | MED-HIGH | ||
| Gudun dunƙulewa | MATSAYI | ||
| Matsin baya | LOW | ||
Rayuwar Shelf da Ajiya
Ya kamata a yi amfani da samfurin a cikin shekara 1 daga ranar da aka yi. Ajiye a cikin marufi na asali a cikin yanayin da ake sarrafa yanayi inda zafin jiki ya bambanta daga 0 ~ 40 ℃, dangi zafi <65% RHF. Ana kiyaye wannan samfurin daga hasken rana kai tsaye
Kambar
Haɗu da ma'aunin EIA-481 na yanzu don camber wanda bai fi 1mm ba cikin tsayin millimeter 250.
Albarkatu
| Abubuwan Jiki don Kayayyaki | Zane |
| Rahotannin da aka gwada Tsaro |
