Polyethylene Terephthalate Flat Ɗauke da Tef ɗin Featured Hoton

Polyethylene Terephthalate Flat Tef mai ɗaukar hoto

An yi shi da polyethylene terephthalate bayyananne abu
Akwai shi a cikin kewayon kauri, daga 0.30mm zuwa 0.60mm
Akwai masu girma dabam daga 4mm zuwa 88mm a tsawon 400m, 500m, 600m don zaɓi.
Ya dace akan duk masu ba da abinci na SMT

Cikakken Bayani

Tags samfurin

Sinho yana ba da kewayon Flat Punched Carrier Tepes a cikin kayan daban-daban, gami da polystyrene bayyananne da baki, polycarbonate baƙar fata, bayyanannen polyethylene terephthalate (PET), da farar takarda. Sinho's Polyethylene terephthalate (PET) Flat Punched Carrier Tepe an ƙera shi don shugabannin Tef da Reel da tirela don reels na ɓangaren ɓangaren, Ya dace da yawancin masu ba da abinci na SMT da wuri. Wannan tef ɗin da aka buga kuma za a iya fanɗa shi a kan reels na SMD na yanzu don tsawaita tsayin su da rage sharar gida.

Polyethylene terephthalate (PET) Flat Punched Carrier Tef babban abu ne mai hana ruwa. Ana ba da shi a cikin kauri na 0.3mm, 0.4mm, 0.5mm, da 0.6mm, tare da zaɓi mai faɗi na faɗin tef jere daga 4mm zuwa 88mm. Keɓancewa na duka kauri da tsayi yana samuwa akan buƙata.

Cikakkun bayanai

An yi shi da polyethylene terephthalate bayyananne abu		An ba da shi a cikin kewayon kauri mai faɗi, daga 0.30mm zuwa 0.60mm		Matsakaicin girman da ake samu ya kai daga 4mm zuwa 88mm
Mai jituwa tare da nau'ikan nau'ikan zaɓin SMT daban-daban da masu ciyarwa		Wannan samfurin ya zo a cikin tsawon 400m, 500m, da 600m		Ana iya saukar da girma da tsayi na al'ada

Akwai Nisa

Faɗin 4mm kawai tare da ramukan sprocket

W	SO	E	PO	DO	T
4.00 ±0.05	/	0.90 ±0.05	2.00 ±0.04	0.80 ±0.04	0.30 ±0.05

Fadi8-24mm kawai tare da ramukan sprocket

W	SO	E	PO	DO	T
8.00 ±0.30	/	1.75 ±0.10	4.00 ±0.10	1.50 +0.10/-0.00	0.30 ±0.05
12.00 ±0.30	/	1.75 ±0.10	4.00 ±0.10	1.50 +0.10/-0.00	0.30 ±0.05
16.00 ±0.30	/	1.75 ±0.10	4.00 ±0.10	1.50 +0.10/-0.00	0.30 ±0.05
24.00 ±0.30	/	1.75 ±0.10	4.00 ±0.10	1.50 +0.10/-0.00	0.30 ±0.05

Fadi32-88mm tare da sprocket ramukan da elliptical ramukan

W	SO	E	PO	DO	T
32.00 ±0.30	28.40 ±0.10	1.75 ±0.10	4.00 ±0.10	1.50 +0.10/-0.00	0.30 ±0.05
44.00 ±0.30	40.40 ±0.10	1.75 ±0.10	4.00 ±0.10	1.50 +0.10/-0.00	0.30 ±0.05
56.00 ±0.30	52.40 ±0.10	1.75 ±0.10	4.00 ±0.10	1.50 +0.10/-0.00	0.30 ±0.05

Abubuwan Al'ada

Alamomi		SINHO
Launi		Share
Kayan abu		Polyethylene Terephthalate (PET) Insulative
Zaɓuɓɓukan faɗi sun haɗa da		4mm, 8mm, 12mm, 16mm, 24mm, 32mm, 44mm, 56mm, 72mm, da 88mm
Kauri		sun hada da 0.3mm, 0.4mm, 0.5mm, 0.6mm, ko al'ada kauri kamar yadda ake bukata
Tsawon		400M, 500M, 600M, ko tsayin da za a iya daidaitawa akan buƙata

Kayayyakin Kayayyaki

Abubuwan Jiki	Hanyar gwaji	Naúrar	Daraja
Takamaiman Nauyi	Saukewa: ASTM D-792	g/cm3	1.36
Kayayyakin Injini	Hanyar gwaji	Naúrar	Daraja
Ƙarfin Ƙarfin Ƙarfi @Yield	ISO527-2	MPA	90
Tsawaita Tsayawa @Break	ISO527-2	%	15
Abubuwan Lantarki	Hanyar gwaji	Naúrar	Daraja
Juriya na Surface	ASTM D-257	Ohm/sq	/
Thermal Properties	Hanyar gwaji	Naúrar	Daraja
Zafin murdiya	ISO75-2/B	℃	75
Na gani Kayayyaki	Hanyar gwaji	Naúrar	Daraja
Watsawa Haske	ISO-13468-1	%	91.1

Rayuwar Shelf da Ajiya

Wannan samfurin yana kula da ingancinsa har tsawon shekara guda a ƙarƙashin sharuɗɗan ajiya da aka ba da shawarar: Ajiye shi a cikin marufi na asali, adana tsakanin 0 ℃ zuwa 40 ℃, tare da dangi zafi ƙasa da 65% RHF, da kariya daga hasken rana kai tsaye da danshi.

Kambar

Haɗu da ma'aunin EIA-481 na yanzu don camber wanda bai fi 1mm ba cikin tsayin millimeter 250.

Albarkatu

Abubuwan Jiki don Kayayyaki Kayayyakin Jiki don PET Clear Sheet Material (PDF, 78KB)	Zane Sinho 4mm Zana Tef (PDF, 46KB) Sinho 8-24mm Zana Tef mai naushi (PDF, 55KB) Sinho 32-56mm Zana Tef mai naushi (PDF, 56KB)
Rahotannin da aka gwada Tsaro Rahoton gwaji na TSCA (PDF, 470KB) Rahoton gwaji na RoHS (PDF, 443KB) LABARI CIKIN GWAJI NA HALOGEN (PDF, 392KB) LABARI: GWAJIN ESD (PDF, 1616KB)