Kayayyaki
Tef ɗin ɗaukar hoto na Polystyrene
Sinho's PS (polystyrene) tef ɗin ɗaukar hoto yana ba da ƙarfi mai kyau da kwanciyar hankali akan lokaci da bambance-bambancen zafin jiki don nau'ikan girma da ƙira, daidai da ƙa'idodin EIA-481-D.Ana samun wannan kayan a cikin nau'ikan kauri daga 0.2mm zuwa 0.5mm don kewayon allon tef ɗin nisa daga 8mm zuwa 104mm.Sauran kayan aikin tattalin arziki na PS + C (polystyrene da carbon) cikakke don ƙirar aljihun ƙira, an inganta shi sosai don ƙananan aljihu don faɗin 8mm da 12mm.Don haka wannan kayan PS+C ya dace da babban tef ɗin jigilar kaya a daidaitattun tsayin daka.
Barbashi forming inji da ake amfani da tsirar kananan 8 da 12mm m tef a PS + C abu don babban girma, da kuma tsawon har zuwa 1000 mita, dangane da girman da fuskantarwa na na'urar da ake kunshe, ta yin amfani da matakin-iska format marufi a 22 inci. farar fata.Abubuwan sarrafawa na PS suna amfani da sarrafa juzu'i da sarrafa linzamin kwamfuta don gamsar da aikace-aikace daban-daban daga buƙatun abokan ciniki, musamman waɗanda aka ƙera don keɓantattun ƙirar aljihu.Adadin mita za su dace a kan reel ɗin da aka bayar yana da sharadi akan farar aljihu (P), zurfin aljihu (K0), da daidaitawar reel.Dukansu iska guda ɗaya da matakin-iska sun dace da wannan kayan a cikin takarda da aka lalata da filasta.
Cikakkun bayanai
| Ya dace da daidaitaccen tef ɗin ɗaukar hoto.PS+C yana aiki da kyau a daidaitattun ƙirar aljihu | Akwai shi a cikin kauri daban-daban, jere daga 0.20mm zuwa 0.50mm | An inganta shi don nisa daga 8mm zuwa 104mm, PS + C cikakke don faɗin 8mm da 12mm | ||
| An ƙirƙira don samar da matsakaicin juriya na murkushewa da daidaiton ƙarfin kwasfa tare daKaset ɗin Rufe Mai Matsala na Sinho AntistatickumaSinho Heat An Kunna Kaset ɗin Murfin Manne | Mafi girman kewayon damar: PS + C injiniya don babban girma a cikin sarrafa ƙwayoyin cuta, kayan PS galibi an kafa su ne a cikin na'ura mai linzami & rotary forming machine. | Tsawon tsayi har zuwa 1000m da ƙananan MOQ yana samuwa | ||
| Iska ɗaya ko matakin-iska don zaɓinku.Dukansu takarda mai ƙwanƙwasa da filayen filasta suna ba da su | Ana duba ma'auni masu mahimmanci kuma ana duba su a tazara na yau da kullun kuma ana yin rikodin su | 100% a cikin aikin duba aljihu |
Abubuwan Al'ada
| Alamomi | SINHO | |
| Launi | Baki | |
| Kayan abu | Polystyrene (PS) | |
| Gabaɗaya Nisa | 8 mm, 12 mm, 16 mm, 24 mm, 32 mm, 44 mm, 56 mm, 72 mm, 88 mm, 104 mm | |
| Kunshin | Iska ɗaya ko Tsarin iska ɗaya akan 22" reel na kwali |
Kayayyakin Kayayyaki
PS Gudanarwa
| Abubuwan Jiki | Hanyar gwaji | Naúrar | Daraja |
| Takamaiman Nauyi | Saukewa: ASTM D-792 | g/cm3 | 1.06 |
| Kayayyakin Injini | Hanyar gwaji | Naúrar | Daraja |
| Ƙarfin Ƙarfin Ƙarfi @Yield | ISO527 | Mpa | 22.3 |
| Ƙarfin Ƙarfin Ƙarfi @Break | ISO527 | Mpa | 19.2 |
| Tsawaita Tsayawa @Break | ISO527 | % | 24 |
| Abubuwan Lantarki | Hanyar gwaji | Naúrar | Daraja |
| Juriya na Surface | ASTM D-257 | Ohm/sq | 104 ~ 6 |
| Thermal Properties | Hanyar gwaji | Naúrar | Daraja |
| Zafin murdiya | Saukewa: ASTM D-648 | ℃ | 62 |
| Ƙunƙarar ƙira | Saukewa: ASTM D-955 | % | 0.00725 |
Rayuwar Shelf da Ajiya
Ya kamata a yi amfani da samfurin a cikin shekara 1 daga ranar da aka yi.Ajiye a cikin marufi na asali a cikin yanayi mai sarrafa yanayi inda zafin jiki ya bambanta daga 0 ~ 40 ℃, dangi zafi<65% RHF.Ana kiyaye wannan samfurin daga hasken rana kai tsaye da danshi.
Kambar
Haɗu da ma'aunin EIA-481 na yanzu don camber wanda bai fi 1mm ba cikin tsayin millimeter 250.
Dacewar Tafi
| Nau'in | Matsanancin Matsi | An kunna zafi | |||
| Kayan abu | SHPT27 | Saukewa: SHPT27D | Saukewa: SHPTPSA329 | SHHT32 | SHHT32D |
| Polystyrene (PS) Mai Gudanarwa | √ | √ | X | √ | √ |
Albarkatu
| Abubuwan Jiki don Kayayyaki | Takardar bayanan Tsaron Abu |
| Tsarin samarwa | Rahotannin da aka gwada Tsaro |
