Kayayyaki
Tef ɗin ɗaukar kaya mai faɗi da aka matse da polystyrene
Sinho yana ba da tef ɗin ɗaukar kaya mai faɗi da faɗi wanda aka tsara don aikace-aikacen tef da reel, gami da reel ɗin ɓangarorin da aka haɗa. Ya dace da nau'ikan ciyarwa na SMT da aka zaɓa da wuri. Tef ɗin ɗaukar kaya mai faɗi da faɗi yana samuwa a cikin kauri da girma dabam-dabam, tare da zaɓuɓɓukan kayan aiki ciki har da polystyrene mai haske da baƙi, polycarbonate baƙi, polyethylene terephthalate mai haske, da takarda fari. Bugu da ƙari, wannan tef ɗin da aka ɗora za a iya haɗa shi a kan reel ɗin SMD da ke akwai don tsawaita tsawonsa, yana rage ɓarna.
Tef ɗin ɗaukar kaya mai faɗi da aka yi da polycarbonate (PC) wani abu ne mai kama da baƙar fata wanda aka ƙera don kare abubuwan da ke cikinsa daga fitar da iskar lantarki (ESD). Yana zuwa cikin kauri iri-iri, daga 0.30mm zuwa 0.60mm, kuma yana samuwa a cikin faɗin tef daban-daban, farawa daga 4mm zuwa 88mm.
Cikakkun bayanai
| An ƙera shi da baƙar fata mai amfani da polycarbonate don kariyar ESD | Akwai shi a cikin kewayon kauri mai faɗi: 0.30mm zuwa 0.60mm | Girman da ake da su: 4mm, 12mm, 16mm, 24mm, 32mm, 44mm, 56mm, har ma har zuwa 88mm | ||
| Ya dace da yawancin masu ciyar da SMT da masu ɗaukar kaya | Ana bayar da shi a tsawon mita 400, mita 500, da mita 600 | Ana iya samar da tsayin da aka ƙera |
Faɗin da ake da shi
Faɗi8-24mm kawai tare da ramukan sprocket
| SO | E | PO | DO | T | |
| / | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±0.05 | |
| 12.00 ±0.30 | / | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±0.05 |
| 16.00 ±0.30 | / | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±0.05 |
| 24.00 ±0.30 | / | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±0.05 |
Al'adar Dabbobi
| Alamu | SINHO | |
| Launi | Baƙi | |
| Kayan Aiki | Polystyrene (PS) Mai Gudawa | |
| Faɗin Gabaɗaya | 8mm, 12mm, 16mm, 24mm, 32mm, 44mm, 56mm, 72mm, 88mm, | |
| Kauri | 0.3mm, 0.4mm, 0.5mm, 0.6mm ko wani kauri da ake buƙata | |
| Tsawon | 400M, 500M, 600M ko wasu tsayin da aka keɓance |
Kayayyakin Kayan Aiki
Mai sarrafa PS
| Sifofin Jiki | Hanyar gwaji | Naúrar | darajar |
| Takamaiman Nauyi | ASTM D-792 | g/cm3 | 1.36 |
| Kayayyakin Inji | Hanyar gwaji | Naúrar | darajar |
| Ƙarfin Taurin Kai @Yield | ISO527-2 | MPA | 90 |
| Tsawaitawar Tashin Hankali @Break | ISO527-2 | % | 15 |
| Ƙarfin Wutar Lantarki | Hanyar gwaji | Naúrar | darajar |
| Juriyar Fuskar | ASTM D-257 | Ohm/sq | / |
| Hanyar gwaji | Naúrar | darajar | |
| Zafin zafi yana murƙushewa | ISO75-2/B | ℃ | 75 |
| Na gani Kadarorin | Hanyar gwaji | Naúrar | darajar |
| Watsa Hasken Lantarki | ISO-13468-1 | % | 91.1 |
Rayuwar Shiryayye da Ajiya
A yi amfani da shi cikin shekara 1 daga ranar da aka ƙera shi. A adana a cikin marufin asali, a cikin yanayi mai sarrafawa tare da yanayin zafi na 0-40℃ da kuma zafi <65% RHF. A kare shi daga danshi da hasken rana kai tsaye.
Camber
Yana bin ƙa'idar EIA-481, yana tabbatar da cewa camber ɗin bai wuce 1mm a cikin kowane tsayin 250mm ba.
Albarkatu
| Kayayyakin Jiki don Kayayyaki | Takardar Bayanan Tsaron Kayan Aiki |
| Zane | Rahotannin da aka Gwada a Kan Tsaro |
