Kayayyaki
Madaurin Kariya na Musamman Mai Fuskantar Rami
BANGANDIN KARE NA Sinho suna ba da ƙarin kariya ga abubuwan da aka naɗe a cikin tef da reel. An tsara shi don naɗewa a saman tef ɗin ɗaukar kaya don tsayayya da ƙarfin matsi wanda tef ɗin ɗaukar kaya kaɗai ba zai iya jurewa ba. Akwai nau'ikan guda biyu galibi, madaukai na yau da kullun da madaukai na musamman masu ramuka don ƙarin zaɓuɓɓuka. Duk madaukai na kariya na Sinho sun ƙunshi kayan polystyrene mai sarrafawa, kuma suna samuwa a cikin faɗin tef ɗin ɗaukar kaya na yau da kullun na EIA daga 8mm zuwa 88mm ga nau'ikan biyu. Madaukai na kariya na musamman na Sinho masu ramuka an huda su a cikin kowane tsayin mita 1.09 don reels na inci 13, kowane tsayin mita 1.25 don reels na inci 15. An lulluɓe wannan madaukai na jerin kuma an samar da su a cikin reels na inci 15.
DANNA don ganin an shirya ɗaukar hoto kuma a yi amfani da shi yanzu!
Cikakkun bayanai
| Akwai shi a cikin faɗin tef ɗin ɗaukar kaya na yau da kullun na EIA daga 8mm zuwa 88mm |
| Mai sauƙin amfani-- an huda kayan a kowace mita 1.09 don reels 13", da kuma mita 1.25 don reels 15". |
| Saurin amfani-- kawai ka danna don amfani |
| Ɗauki ƙasa da sarari -- an samar da shi a cikin reels masu diamita 15" |
| Yi aiki cikin sauƙi -- kiyaye madaurin kariya a wurin aikinka |
| Cikakkiyar juriya -- faɗin 0.3mm fiye da faɗin tef ɗin ɗaukar kaya |
Al'adar Dabbobi
| Alamu | SINHO | |
| Launi | Baƙin mai amfani da wutar lantarki | |
| Kayan Aiki | Polystyrene (PS) | |
| Faɗin Gabaɗaya | 4mm, 8mm, 12mm, 16mm, 24mm, 36mm, 44mm, 56mm, 72mm, 88mm | |
| Kunshin | Marufi a cikin reels 15 " |
Kayayyakin Kayan Aiki
| Sifofin Jiki | Hanyar gwaji | Naúrar | darajar |
| Takamaiman Nauyi | ASTM D-792 | g/cm3 | 1.06 |
| Kayayyakin Inji | Hanyar gwaji | Naúrar | darajar |
| Titin Tensiletsawon @Yawa | ISO527 | Mpa | 22.3 |
| Titin Tensilerturanci @Break | ISO527 | Mpa | 19.2 |
| Tsawaitawar Tashin Hankali @Break | ISO527 | % | 24 |
| Ƙarfin Wutar Lantarki | Hanyar gwaji | Naúrar | darajar |
| Juriyar Fuskar | ASTM D-257 | Ohm/sq | 104~6 |
| Halayen Zafi | Hanyar gwaji | Naúrar | darajar |
| Zafi murdiya zafin jiki | ASTM D-648 | 62 | |
| Ƙuntatawa ta ƙera | ASTM D-955 | % | 0.00725 |
Yanayin Ajiya
A adana a cikin marufinsa na asali a cikin yanayin da ake sarrafa yanayi inda zafin jiki yake tsakanin 0 ~ 40℃, ɗanɗanon da ke ƙasa da 65% RHF. Wannan samfurin yana da kariya daga hasken rana kai tsaye da danshi.
Rayuwar shiryayye
Ya kamata a yi amfani da samfurin a cikin shekara 1 daga ranar da aka ƙera shi.
Albarkatu
| Kayayyakin Jiki don Kayayyaki | Takardar Bayanan Tsaron Kayan Aiki |
